Technical

ASME SB-265, identical with ASTM B265, is the standard specification for 39 grades titanium and titanium alloy strip, sheet and plate. The strip, sheet, and plate are generally manufactured by hot-rolling or cold-rolling processes furnished in annealed, descaled, sandblasted or …

The chemical composition, mechanical and other properties of the Inconel 600 plate shall be determined in accordance with the following methods: Chemical analysis: ASTM E38, ASTM E1473 Tension requirements: ASTM E8 Brinell hardness: ASTM E10 Rockwell hardness: ASTM E18 Hardness …

As a typical Ni-Cr-Fe alloy, Inconel 600 can be furnished as plates, sheets, or strips which shall be manufactured in accordance with ASTM B168 Gr. N06600. The plate, sheet, and strip shall be uniform in quantity and temper, smooth, commercially straight …

ASME SB-381, identical with ASTM B381, is the standard specification for annealed titanium and titanium forgings. 39 grades of titanium and titanium alloys are covered by this standard. The titanium alloy forgings shall be made from bars or billets conforming …

ASME SB-367, identical with ASTM B367, is the standard specification for titanium and titanium alloy castings which are intended for general corrosion resistant and industrial applications. The titanium castings may be furnished in the form of pump body, valve body, …

ASME SB-363, identical with ASTM B363 except for some minor difference in section 11.3, is the standard specification for seamless and welded unalloyed titanium and titanium alloy welding fittings. The fittings are intended for general corrosion-resisting and elevated-temperature services. The …

ASME SB-348, which is identical with ASTM B348, is the standard specification for titanium and titanium alloy bars and billets. It covers all annealed grades of titanium and titanium alloy. The titanium bars can be either hot rolled, forged, extruded, …

ASME SB-338 is the standard specification for seamless and welded titanium and titanium alloy tubes or tubing which are intended for surface condensers, evaporators, and heat exchangers. It is identical with ASTM B338 except for some minor difference in product …

ASME SB-862 is the standard specification for titanium and titanium alloy welded pipes which are intended for general corrosion resisting and elevated temperature service. It is identical with ASTM B862 except for some minor fine tune of additional requirements. The standard …

ASME SB-861 is the standard specification for titanium and titanium seamless pipes which are intended for general corrosion resisting and elevated temperature service. It is almost identical to ASTM B861 except for an editorial revision to para. 4.1.10. It covers …

Generally, Inconel 600 is a typical solution-strengthening alloy. It is necessary to investigate the effects of different solution treatment temperatures on its microstructure and properties. Test Specimen Preparation The test pieces are made from 16 mm-thick hot rolled Inconel 600 plate which …

HB-Metals supplies titanium and titanium alloy seamless pipes which are manufactured in accordance to ASTM B861. The stringent inspection and tests shall be performed on the finished titanium pipes to ensure the premium quality: