Technical

Test specimen: ASTM B265 (ASME SB-265) titanium Gr.2 plates. UNS R50400, annealed condition. Minimum yield strength at room temperature: 40 ksi. The yield strength of titanium grade 2 plate material at elevated temperatures ranging from -20°F to 600°F are listed in the below …

Test specimen: ASTM B265 (ASME SB-265) titanium Gr.2 plates (or its identical grade 2H). UNS R50400, annealed condition. Minimum tensile strength at room temperatures: 58 ksi. The tensile strength of titanium Grade 2 (or 2H) at elevated temperature range from …

Both titanium grade 2 and grade 2H have the same UNS designation R50400. The “H” grade titanium material is identical to the corresponding numeric grade (that is, Grade 2 = Grade 2H) except for the higher guaranteed minimum UTS(ultimate tensile …

Applicability & Maximum Temperature Limits The titanium grade 2 plates shall be manufactured in accordance with ASTM B265/ ASME SB-265. It UNS designation is R50400 which is often furnished in annealed condition. The material can be applied for power boilers (ASME …

Applicability and Maximum Temp. Limits The ASTM A516 Gr.55 (ASME SA-516 Gr.55) plates are applicable for the construction of power boilers (ASME BPVC Section I), nuclear power plant components (ASME BPVC Section III Classes 2 & 3), pressure vessels (ASME …

Applicability and Maximum Temp. Limits Same as ASTM A516 Gr.70 & Gr.65, the ASTM A516 Gr.60 (ASME SA-516 Gr.60) plates are applicable for the construction of power boilers (ASME BPVC Section I), nuclear power plant components (ASME BPVC Section III …

Applicability and Maximum Temp. Limits The ASTM A516 Gr.65 (ASME SA-516 Gr.65) plates are applicable for the construction of power boilers (ASME BPVC Section I), nuclear power plant components (ASME BPVC Section III Classes 2 & 3), pressure vessels (ASME …

Applicability and Maximum Temp. Limits The ASTM A516 Gr.70 (ASME SA-516 Gr.70) plates are applicable for the construction of power boilers (ASME BPVC Section I), nuclear power plant components (ASME BPVC Section III Classes 2 & 3), pressure vessels (ASME …

Pressure-Temp. Ratings for A516 Gr.65: US Customary Unit *Unit of working pressures: psig; Unit of temperature: °F. *Upon prolonged exposure to temperature above 800°F, the carbide phase of steel may be converted to graphite. Permissible but not recommended for prolonged …

Pressure-Temp. Ratings for A516 Gr.60: US Customary Unit *Unit of working pressures: psig; Unit of temperature: °F. *Upon prolonged exposure to temperature above 800°F, the carbide phase of steel may be converted to graphite. Permissible but not recommended for prolonged …

Pressure-Temp. Ratings for A516 Gr.70: US Customary Unit *Unit of working pressures: psig; Unit of temperature: °F. *Upon prolonged exposure to temperature above 800°F, the carbide phase of steel may be converted to graphite. Permissible but not recommended for prolonged …

General Introduction ASTM A516, identical with ASME SA-516, is the standard specification for carbon steel pressure vessel plates, for moderate-and lower-temperature service. The major advantage of A516 or SA-516 steel plates is their low initial cost. These plates are primarily …