Technical

AWS A5.14 ENiCrMo-4 is a specification for bare welding electrodes and rods used for Hastelloy C276. The welding method is gas tungsten arc welding(GTAW). It is one welding layer between two alloy C276 plates. The working pressure is at 12~18V; the electricity is straight polarity …

The tensile strengths and yield strengths of Hastelloy C-276(UNS N10276) plates at elevated temperatures are provided in ASME Boiler and Pressure Vessel Code Section II Part D. These values, which are tabulated in below two tables, are provided for use in design …

Manufactured to ASTM B575(ASME SB-575), Hastelloy C-276(UNS N10276) can be used for FGD tower. According to ASME Boilers and Pressure Vessel Code Section II Part D, they are applicable for the construction of power boilers (Section I), nuclear power plant components (Section …

The Hastelloy C-276 plates/ sheets are generally manufactured in accordance with ASTM B575 or ASME SB-575 Grade UNS N10276. When used in flue gas desulfurization systems, the alloy C-276 plates are usually lined or cladded to the internal surface of …

Material Characteristics The ASTM A789 UNS S31803 tubing refers to seamless and welded tubing manufactured in accordance with ASTM A789/ASTM A1789M, which contains approximately 50% ferrite and 50% austenite. The stress corrosion resistance of ASTM A789 in neutral chloride solution and H2S is …

The tensile strengths and yield strengths of ASTM A182/ASME SA-182 F51 forgings at elevated temperatures are provided in ASME Boiler and Pressure Vessel Code Section II Part D. These values, which are tabulated in below two tables, are provided for use …

Applicability and Temperature limits The ASTM A182/ASME SA-182 F51 forging refers to forged flange, forged fitting or other pressure components made from duplex stainless steel ASTM A182 Grade F51(UNS S31803). The material has a nominal composition of 22Cr–5Ni–3Mo–N. Its P-Number and …

Material Characteristics The ASTM A182 F51 flanges refer to standard or non-standard flanges manufactured in accordance with ASTM A182 Grade F51, which is designated with UNS number S31803. The A182 Gr. F51 / S31803 material is a typical duplex stainless …

Monel 400, designed as UNS N04400, has the nominal composition of 67Ni-30Cu. Materials made from Monel 400 are widely applied for projects designed to ASME Boiler & Pressure Vessel Codes. They may be furnished in either annealed, hot worked, cold worked, as rolled, as drawn or stress rel. Its product …

Generally, Inconel alloy 625 plate, sheet and strip shall be manufactured in accordance with ASTM B443/ ASME SB-443. Designated as UNS N06625, the material has a nominal chemical composition of 60Ni-22Cr-9Mo-3.5Cb, which indicates that it is a nickel-chromium-molybdenum-columbium alloy. The …

TC is the thermal conductivity with an unit of Btu/hr-ft-°F, and TD is the thermal diffusivity with and unit of ft2/hr. The nominal coefficients of TC and TD for nickel alloy 625 (UNS N06625) at elevated temperatures are listed in below …

The thermal expansion coefficients for Inconel alloy 625 (UNS N06625) includes: Coefficient A – the instantaneous coefficient of thermal expansion x 10-6(inch/inch/°F); Coefficient B – the mean coefficient of thermal expansion x 10-6(inch/inch/°F) in going from 70°F to indicated temperature; …