Search Results for: 1

Hastelloy C276 (ASTM B575 UNS N10276) strips after preliminary rolling with dimensions 5 mm(thickness) x 175 mm(width). They are the raw material for production of 0.2 mm – thick strips. Hastelloy C-276 is a typical low-carbon nickel-chromium-molybdenum alloy widely used …

Hastelloy C-276 pipe fittings refer to factory-made wrought nickel alloy fittings manufactured to ASTM B366 UNS N10276. It can be designated as CRHC276(corrosion resistant fittings) or WPHC276(ASME pressure fittings). The fittings can be manufactured from pipe or tube of ASTM …

Hastelloy B2 seamless pipe or tube refers to the nickel-molybdenum alloy pipe or tube manufactured to ASTM B622 UNS N10665. The pipe or tube shall be supplied in solution annealed and descaled condition. It shall be furnished with plain ends …

EN 1092 is a series of standard specifications for flanges and their joints – circular flanges for pipes, valves, fittings and accessories, PN designated. These directive codes are released by EU’s standardization organization CEN and they are mainly derived from relative British …

The design stress intensity of ASTM B163 Gr. N08825 seamless tubes are listed in below table: *Nominal composition: 42Ni–21.5Cr–5Mo–2.3Cu. *A: ASTM B163 Gr. N08825 seamless tubes, annealed, P-No.: 45.

Seamless tubes manufactured to ASTM B163 UNS N08825 (Incoloy Alloy 825) are primarily used for condenser and heat-exchanger service. They are applicable for piping systems designed according to ASME BPVC Section III Class 3 or ASME BPVC Section VIII Division 1 with …

The Texaco coal gasification process is widely used for the production of synthetic gas in fertilizer plants. Texaco gasifier is the core equipment which mainly consists of combustion chamber and cooling zone(or quench chamber). Metals-Piping has supplied an integral flange …

The Inconel 600 wire refers to an ASTM B166 UNS N06600 cold-worked wire which has uniform round cross section along its whole length, supplied in coil form. They can be further woven into wire mesh or wire cloth which are widely used for …

Metals-Piping recently supplied 8 pieces of heavy-wall Inconel 600 elbows to a subcontractor from Brazil. These elbows will be used for the pipeline connecting the reactor and heat exchanger in a fertilizer plant(Vale Fertilizantes, Minas Gerais, Brazil). Specifications: 2″ 90° seamless elbows, …

Monel 400 (UNS N04400) seamless tubes manufactured to ASTM B163 are mainly used for condenser or heat-exchanger service. These tubes are generally furnished in small size with light wall: from 3″ (76.2 mm) and under in outside diameter with minimum wall …

The ASTM B165 (identical to ASME SB-165) is the standard specification covering nickel-copper alloy Monel 400 (UNS N04400) in the form of cold-worked seamless pipe and tube. Metals-Piping supplies Monel 400 seamless pipes sized from 2″ to 16″ covering nominal …

ASTM B127 is the standard specification for the nickel-copper alloy Monel 400 (UNS N04400) plate, sheet and strip. The Monel 400 material supplied by Metals-Piping can be either hot rolled or cold rolled which are further classified by thickness. *Materials …