Search Results for: 1

ASTM A350 is the standard specification covering carbon and low-alloy steel forged or ring-rolled flanges, forged fittings and valves intended primarily for low-temperature service and requiring notch toughness testing. They are manufactured to corresponding ASME or API dimensional standards. The forgings may be …

ASTM A333 is the standard specification for seamless and welded carbon and alloy steel pipe for low temperature service or other applications requiring notch toughness. There are several grades of ferritic steel covered by this standard: Grade, Grade 3, Grade 4, Grade …

ASTM A420 WPL6 Low-Temperature Fittings Charpy V-Notch Impact Test The impact test was performed at the temperature of 50°F[-45°C]. Size of specimen selected: 10 mm by 10.0 mm.

ASTM A860 is the standard specification for wrought high-strength ferritic steel butt-welding fittings of seamless and electric fusion-welded construction. These pipe fittings shall be furnished in accordance with the dimensions of ASME B16.9(for sizes NPS 14 and smaller) or MSS …

ASTM A420 is the standard specification for pipe fittings of wrought carbon steel and alloy steel for low temperature service. These fitting, either of seamless or welded construction, are primarily used in pressure piping and pressure vessel service at low …

ASTM A707 is the standard specification covers forged carbon and alloy steel flanges intended primarily for petroleum and gas pipeline in areas subject to low ambient temperatures. It specifies 8 grades, 4 yield-strength classes, and 3 different notch toughness levels. ASTM …

Beveling Machine for Butt Welding Pipe Fittings ASME B16.9 Welding End Transitions * See more details of ASME B16.9 welding-end preparation.

ASTM A234 is the standard specification for pipe fittings of wrought carbon steel and alloy steel for moderate and high-temperature service. The Cr-Mo low alloy steel pipe fittings has been separately listed on our website. Carbon steel pipe fittings manufactured …

Dimensions of MSS SP 75 Caps *The shape of these caps shall be ellipsoidal and shall conform to the shape requirements as given in the ASME BPVC. *For t greater than 1.0 inch, caps may be furnished to length E1, at …

Dimensions of MSS SP 75 Reducing Tees *View more technical details of MSS SP 75 pipe fittings.

Dimensions of MSS SP 75 Concentric & Eccentric Reducers *View more technical details of MSS SP 75 pipe fittings.

MSS SP 75 specifies the dimensional tolerances of WPHY butt-welding pipe fittings sized from 16″(DN400) through 60″(DN1500). For fittings 14″(DN350) and smaller, please refer to ASME B16.9. Dimension-Tolerances of MSS SP 75 Fittings The minimum wall thickness shall be 0.01 …