Search Results for: 1

1. Thermal Conductivity of Monel 400(UNS N04400) *The unit of thermal conductivity is Btu/hr-ft-°F. 2. Thermal Diffusivity of Monel 400(UNS N04400) *The unit of thermal diffusivity is ft2/hr.

1. Instantaneous Coefficient of Thermal Expansion of Monel 400 *A refers to the instantaneous coefficient of thermal expansion of Monel 400 with an unit of 10-6in./in./°F. 2. Mean Coefficient of Thermal Expansion of Monel 400 *B refers to the mean …

1. Monel 400 Group 1: Allowable Stress – Temperature Table *Group 1 refers to Monel 400 bar, seamless pipe & tube (＞5″ in OD), and forging of annealed condition. *Metal temperature shall be interpreted as “not exceeding”. 2. Monel 400 Group 2: …

There are miscellaneous piping materials made from Monel 400 (UNS N04400, 67Ni-30Cu). These materials can be used in boiler or pressure vessel applications according to relative ASME Boil & Pressure Vessel Code(BPVC). 1. Monel 400 Products for Boiler & Pressure Vessel …

Metals-Piping holds a large volume of nickel and nickel alloys plates, sheets and strips in stock. The material covers Inconel series, Monel series, Hastelloy series, Incoloy series, as well as Nickel 200 and Nickel 201. All the products are manufactured …

In pipeline engineering, the sizes of piping components are designated by two systems: NPS and DN. NPS is referred to as nominal pipe size which is the US customary system while DN is referred to as nominal diameter which is …

The photos of Inconel 600 (ASTM B564 UNS N06600) flanges: spectacle blind (ASME B16.48), weld neck (ASME B16.5). All flanges are supplied for a PEMEX project in Mexico.

The photo below shows the dye penetrant test for Monel 400 pipe elbows supplied to a client from Peru. The elbows are manufactured to ASME B16.9 and ASTM B366 WPNC (UNS N04400). The liquid penetrant examination (LPE) shall be conducted …

Alloy 20: UNS N08020. We have supplied branch outlets made of this material to a Bulgarian client. Please see the photos taken below:

ASTM A333 is the standard specification for seamless and welded pipe for low-temperature service and other applications with required notch toughness. Metals-Piping hold large amount of ASTM A333 Grade 6 seamless pipes in stock. 3″ SCH40 Seamless Pipes, ASTM A333 …

Seamless steel pipes or tubes manufactured to ASME SA335 P92 or ASME SA213 T92 are widely used in supercritical and ultra-supercritical power plant units. Postweld heat treatment for this material is mandatory. The P92/ T92 steel (UNS K92460, 9Cr-2W) shall …

The P92/ T92 seamless pipes or tubes manufactured to either ASME SA335 or ASME SA213 are widely applied in modern ultra-supercritical power plant units to improve heat efficiency. According to Metals-Piping’s engineering practice, it is most applicable to the steam-temperature …