Search Results for: 1

In the manufacturing of most austenitic stainless steel pipes, tubes, fittings and flanges, solution annealing is commonly applied after forming process is done. These stainless steel grades include SS304/ SS304L, SS316/ SS316L, SS317/ SS317L, SS321, SS347, etc. Generally, the term solution …

Inconel 600(UNS N06600) is a typical nickel-chromium-iron superalloy. Due to the high nickel content, it has excellent corrosion resistance to many acids and alkalis, especially, the resistance to stress corrosion in chloride conditions. The chromium(Cr) contained provides resistance to oxidation …

Titanium clad steel plates are widely used in PTA(pure terephthalic acid) projects for the fabrication of oxidation reactor. We have been supplying a variety of Ti-clad steel plates to a Polish client specializing in PTA equipment.

Due to its excellent corrosion resistance to sodium chloride solution, titanium are widely used for vacuum salt making industry. In order to reduce the cost, titanium clad steel plates are usually chosen for the fabrication of evaporator. Metals-Piping has been supplying …

In modern fossil-fuel power plants, the sulfur dioxide shall be removed from the exhaust flue gases before emitting to atmosphere. This is usually achieved by a process called flue-gas desulfurization(FGD) in a scrubber. In the wet scrubbing process, harsh corrosion may occur …

General Introduction The titanium-clad steel plate is a typical metallic laminar composites. It is also known as titanium cladding or titanium-steel bimetallics. Usually, they are produced by deformation bonding: either hot/cold-roll bonding or explosive bonding. The titanium clad steel plate obtains …

The welding of a titanium tube sheet with titanium tubes. The tube sheet is made of titanium cladding: ASTM A516 Grade 70 plate bonded with the ASTM B265 Gr.1 sheet. The titanium welded tubes (Φ25mm x 0.7mm thk. x 11.2m length) …

The commercially pure titanium such as titanium grade 1 and grade 2 is reactive in atmosphere. A protective oxide film formed on its surface prevents further corrosion. It makes titanium materials quite stable in atmosphere. However, during the welding of titanium, …

Recently, we have supplied a titanium Grade 2 hollow bar to an US client. The hollow bar is made from ASTM B381 Gr.2 forgings and its production process is the combination of open-die & closed-die forging processes. This titanium hollow …

Monel Valves: Materials Monel valves refer to industrial valves made from Monel alloys which are nickel-copper based corrosion resistant solid solution alloys. The copper added can improve the corrosion resistance and strength of the nickel alloy. In valve industry, Monel alloys are …

The chlor alkali process is one of the most severe corrosive chemical processes. It involves brine, sodium hydroxide solution, molten caustic soda, chlorine, and hydrochloric acid, etc which may lead to strong reducing or oxidizing corrosive environment. Membrane cell method is the …

Hastelloy C-276 sheets manufactured to ASTM B575 Gr. UNS N10276 can be used for the construction of plate heat exchangers. The plate heat exchanger include “standard plate heat exchanger”, “semi-welded heat exchanger”, and “brazed plate heat exchanger”. Hastelloy C-276 is …