Search Results for: 1

The Alloy 625(UNS N06625) 5D pipe bends 90° & 45° SCH 80 manufactured to ASME B16.9. These are supplied to a chemical project in Poland.

Recently, we have supplied a batch of Inconel 600 butt welding fittings to a US client from Illinois. The fittings include 6″ & 4″ 90° long radius(L/R) elbows SCH40, 4″ SCH10S 5D bend, 8″ x 6″ & 12″ x 8″ …

1. Technical Drawings 2. Dimensions of MSS SP 43 Reducers *All dimensions are in inch unit. *H: length of the reducer(concentric or eccentric). *O.Dle: outside diameter at bevel of large end; O.Dse: outside diameter at bevel of small end. 3. …

1. Technical Drawing Note: The MSS SP 43 stub end is short pattern. It can be used with lap joint flanges or slip on flanges, depending on which the radius of fillet may differ. 2. Dimensions of MSS SP 43 …

1. Technical Drawing 2. Dimensions of MSS Sp 43 Reducing Tee *All dimensions are in inch unit. *O.DR: outside diameter of runlet; *O.DO: outside diameter of outlet. *C: length of center-to-end run; M: length of center-to-end outlet. Size range: from NPS …

1. Drawing of Straight Tees 2. Dimensions *All dimensions are in inch unit. *C: center to end run length; *M: center to end outlet length. 3. Tolerances *CM-Tol: the tolerances for center-to-end dimensions C & M; *OA: off angle of …

1. Technical Drawing 2. Dimensions *All dimensions are in inch unit. 3. Tolerances *The CTE-Tol refers to tolerances for center-to-end dimension A & B for 90° & 45° elbows. *OA & OP: tolerances for off angle as shown in above …

MSS SP 43 butt welding fittings are wrought or fabricated for low pressure, corrosion resistant applications. The fittings include 90° & 45° long radius elbows, straight and reducing tees, lap joint stub ends, caps, 180° long radius returns, concentric and …

The DIN/ ISO titanium hexagon head bolts and screws are generally used with its mating hexagon nuts manufactured in accordance with DIN 934 or ISO 4032. The nut material can be either titanium Gr.1, Gr.2, Gr,3, Gr.5, Gr.7, Gr.12, etc. There …

The seamless titanium pipes shall be manufactured according to ASTM B861 Gr.2; the welded titanium pipes shall be manufactured in accordance with ASTM B862 Gr.2. Sizes: 2″~24″, wall thickness: SCH 20, SCH 40, STD, SCH 80. Buyer: Czech client, for …

Butt welding tees of titanium grade 2 which are made from ASTM B861 Ti Gr.2 titanium seamless pipes. Buyer: a process company from Birmingham, UK.

We carry a large volume of titanium Gr.2 pipe fittings in stock. The butt welding pipe fittings are manufactured according to dimensional standard specification of ASME B16.9 covering elbows, tees, reducers, and caps. According to ASTM B363, for sizes up …