Search Results for: 1

Inconel Alloy 600 is designated as UNS N06600 with nominal composition of 72Ni-15Cr-8Fe. According to ASME Boiler and Pressure Vessel Code(BPVC) Section IX: Welding and Brazing Qualifications, the welding P-Number of Inconel 600 is 43 and the brazing P-Number of Inconel …

Generally, Inconel 600 forgings shall be manufactured in conformance with ASTM B564 UNS N06600. In order to investigate the chemical composition and mechanical properties under different conditions, test specimens sized of Φ20 mm x 200 mm(L) are prepared from the original …

ASME SB-265, identical with ASTM B265, is the standard specification for 39 grades titanium and titanium alloy strip, sheet and plate. The strip, sheet, and plate are generally manufactured by hot-rolling or cold-rolling processes furnished in annealed, descaled, sandblasted or …

The chemical composition, mechanical and other properties of the Inconel 600 plate shall be determined in accordance with the following methods: Chemical analysis: ASTM E38, ASTM E1473 Tension requirements: ASTM E8 Brinell hardness: ASTM E10 Rockwell hardness: ASTM E18 Hardness …

ASME SB-367, identical with ASTM B367, is the standard specification for titanium and titanium alloy castings which are intended for general corrosion resistant and industrial applications. The titanium castings may be furnished in the form of pump body, valve body, …

ASME SB-363, identical with ASTM B363 except for some minor difference in section 11.3, is the standard specification for seamless and welded unalloyed titanium and titanium alloy welding fittings. The fittings are intended for general corrosion-resisting and elevated-temperature services. The …

ASME SB-348, which is identical with ASTM B348, is the standard specification for titanium and titanium alloy bars and billets. It covers all annealed grades of titanium and titanium alloy. The titanium bars can be either hot rolled, forged, extruded, …

ASME SB-338 is the standard specification for seamless and welded titanium and titanium alloy tubes or tubing which are intended for surface condensers, evaporators, and heat exchangers. It is identical with ASTM B338 except for some minor difference in product …

ASME SB-862 is the standard specification for titanium and titanium alloy welded pipes which are intended for general corrosion resisting and elevated temperature service. It is identical with ASTM B862 except for some minor fine tune of additional requirements. The standard …

The Hastelloy C-276 seamless pipes, heavy wall, DN 200 x 25 mm(thickness). They are manufactured to ASTM B622 Gr. N10276. Manufacture: hot rolled. Delivery conditions: descaled and annealed.

Generally, Inconel 600 is a typical solution-strengthening alloy. It is necessary to investigate the effects of different solution treatment temperatures on its microstructure and properties. Test Specimen Preparation The test pieces are made from 16 mm-thick hot rolled Inconel 600 plate which …