Search Results for: 1

Generally, there are 8 grades of titanium and titanium alloys that are most commonly used in industrial applications in which corrosion resistance is often of primary concern. Among these titanium materials, titanium Grade 1, Grade 2, Grade 3, and Grade …

Titanium has been recognized as an element for more than 200 years. Only in the early 1950’s, however, has the metal gained strategic importance. Titanium and its alloys are first used for aerospace applications due to their high strength-to-density ratios. …

Applicability & Maximum Temperature Limits The titanium grade 2 plates shall be manufactured in accordance with ASTM B265/ ASME SB-265. It UNS designation is R50400 which is often furnished in annealed condition. The material can be applied for power boilers (ASME …

High-temperature piping refers to the piping system designed for elevated temperatures, especially at temperatures above 800°F(425°C). The steels shall have adequate creep strength and maintain good heat resistance, corrosion resistance, metallurgical stability, oxidation resistance, stress-rupture resistance and surface stability against combustion …

Inconel 600 alloys (UNS N06600) may be machined to pipe fittings, flanges, valve parts and other complex shapes. The investigation on Inconel 600’s machinability is introduced in this article. The main machining/ cutting methods include drilling, boring, turning, grinding, and milling, etc. …

Recently, we have supplied Inconel 600 seamless tubes of Φ46 mm x 3 mm to a heat-exchanger manufacturer in Germany. The tubes are made in accordance with ASTM B163 UNS N06600. The manufacturing process of the Inconel 600 tubes is: Non-VIM …

The vertical-style condenser for a chemical contractor in Argentina. The main body material of the shell side is made of Inconel 600 clad steel plates: base metal – plates of ASME SA-515 Gr. 60 with 10 mm thickness; cladding metal – plates …

Metalsin Tech has engaged in the supply of chemical pressure vessels for an isopropanol project in Egypt. The hydration reactor is made of 904L stainless steel clad steel plates: base metal – plates of ASME SA-516 Gr.65 with 94 mm thickness, cladding …

We have engaged in the fabrication of a chemical regenerator for a 160,000 ton/ year propylene project in Chile. The design temperature is 600°C and the design pressure is 35/70 kPa. The medium includes oxygen, air, chlorine, carbon monoxide and …

*E: the modulus of elasticity at given temperature, unit: 106 psi. *The poisson’s ratio of Alloy 600 is 0.31 and its density is 0.300 lb/in3.

Thermal Conductivity of Inconel 600 at Elevated Temperatures *TC: the coefficient of thermal conductivity, unit: Btu / hr-ft-°F. Thermal Diffusivity of Inconel 600 at Elevated Temperatures *TD: the coefficient of thermal diffusivity, unit: ft2 / hr. All values are in …

The thermal expansion coefficients of Inconel 600 (UNS N06600) at elevated temperatures are listed in below table: *Coefficient A: the instantaneous coefficient of thermal expansion, unit: 10-6 (inch/inch/°F). *Coefficient B: the mean coefficient of thermal expansion in going from 70°F …