Search Results for: 1

Identical with ASTM B550, ASME SB-550 is the standard specification for zirconium and zirconium alloy bar and wire. There are also three grades available: Gr. R60702 (unalloyed Zr), Gr. R60704 (Zr-Sn alloy), Gr. R60705 (Zr-Nb alloy). The zirconium bar may be …

Identical with ASTM B493, ASME SB-493 is the standard specification for zirconium and zirconium alloy forgings, which shall be furnished in annealed condition. There are three grades available covering Gr. R60702(unalloyed zirconium), Gr. R60704(zirconium-tin alloy), Gr. R60705(zirconium-niobium alloy). The forgings …

Identical with ASTM B523, ASME SB-523 is the standard specification of seamless and welded zirconium and zirconium alloy tubes. It also covers three same grades of zirconium as that of ASTM B658.  The standard specification covers referenced documents, terminology, classification …

Identical with ASTM B658, ASME SB-658 is the standard specification for seamless and welded zirconium and zirconium alloy pipes. It covers three grades: R60702 – unalloyed zirconium, R60704 – zirconium-tin alloy, R60705 – zirconium-niobium alloy. Generally, the pipe shall be …

ASTM SB-653 is identical with ASTM B653, except that some additional requirements shall apply. It is the standard specification for seamless and welded zirconium and zirconium alloy butt welding fittings. It covers 45° & 90° elbows, 180° returns(bends), caps, tees, …

Titanium grade 2 elbows welded with seamless pipes. Elbows: 90°, 4″ SCH10S long radius, ASME B16.9, ASTM B363 Gr.2, seamless type. Pipes: 4″ SCH 10S (Φ114.3 mmx 3.05 mm), ASTM B861 Gr.2 seamless titanium pipe. These pre-welded fittings are supplied …

Recently, we just supplied 12 pieces of grade 2 titanium welded pipes to a Danish client. Pipe specification: 12″ STD, length = 3 meters. The welded pipes are manufactured in accordance with ASME SB-862 by TIG automatic welding. The welding surface …

Titanium’s TIG welding Generally, titanium shall be TIG welded, which means the welding shall be conducted under inert gas shielding. Both the welding area and heat affected zone(HAZ) shall be protected(shielded) by pure argon gas during the welding process until …

1. What’re Titanium Strips, Coils and Foils? Any titanium product with thickness ≤ 4.75 mm and width < 610 mm is classified as titanium strip. Titanium foils are often much thinner than strips, usually ranging from 0.01 mm to 0.10 mm in …

Generally, ultrasonic tests shall be performed on titanium grade 2 pipes or tubes manufactured to ASTM B861 or ASTM B338, respectively. Both longitudinal and transverse discontinuities shall be examined according to ASTM E213. A pulsed ultrasonic angle beam shall be …

Recently, we have been supplying titanium grade 2 seamless tubes to a US client in Oregon. The tubes are manufactured in accordance with ASME SB-338 by cross-rolled piercing process. Two groups of specimens are prepared each of which has two test …

ASTM A370, which is identical with ASME SA-370, is the standard specification covering test methods and definitions for mechanical testing of ferrous and nonferrous metals such as steels, stainless steels, titanium & its alloy, nickel and its alloy, zirconium and …