Search Results for: 1

ASTM A213 is the standard specification for seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes. Hebei Metals supplies Cr-Mo low alloy steel grades of T2, T5, T5b, T5c, T9, T11, T12, T17, T21, T22, T23, T24, T36, T91, …

Hebei Metals Industrial Limited supplies ASTM A182 low alloy steel, especially Cr-Mo alloy steel forgings for high-temperature piping industry. The ASTM A182 low alloy steel forgings cover pipe flanges, forged fittings, valves and parts which are widely used in boilers, …

Piping materials of ASTM A335 P11 can be used in both process piping and power piping services. The correlation between its allowable stress and temperature must be considered. Usually, the basic allowable stress descends as the working temperature ascends. This …

The seamless pipe of ASTM A335 P11 is a typical Cr-Mo alloy steel pipe for high-temperature service. Also known as 1.25Cr-0.5Mo, the UNS designation of ASTM A335 P11 is K11597. Its ASTM equivalent includes ASTM A369 FP11 as well as …

The titanium Grade 5 strips, made of ASTM B265 UNS R65400, with a nominal composition of Ti-6Al-4V, may be furnished in straight-cut-length or coil types. Generally, it refers to Gr.5 Ti products 0.187″(4.75mm)in thickness and 24″(610mm) in width. Hebei Metals …

Monel 400, designed as UNS N04400, has the nominal composition of 67Ni-30Cu. Materials made from Monel 400 are widely applied for projects designed to ASME Boiler & Pressure Vessel Codes. They may be furnished in either annealed, hot worked, cold worked, as rolled, as drawn or stress rel. Its product …

Generally, Inconel alloy 625 plate, sheet and strip shall be manufactured in accordance with ASTM B443/ ASME SB-443. Designated as UNS N06625, the material has a nominal chemical composition of 60Ni-22Cr-9Mo-3.5Cb, which indicates that it is a nickel-chromium-molybdenum-columbium alloy. The …

TC is the thermal conductivity with an unit of Btu/hr-ft-°F, and TD is the thermal diffusivity with and unit of ft2/hr. The nominal coefficients of TC and TD for nickel alloy 625 (UNS N06625) at elevated temperatures are listed in below …

The thermal expansion coefficients for Inconel alloy 625 (UNS N06625) includes: Coefficient A – the instantaneous coefficient of thermal expansion x 10-6(inch/inch/°F); Coefficient B – the mean coefficient of thermal expansion x 10-6(inch/inch/°F) in going from 70°F to indicated temperature; …

Inconel alloy 625, designated as UNS N06625, has the nominal composition of 60Ni–22Cr–9Mo–3.5Cb. Materials made from Inconel alloy 625 are widely applied for projects designed to ASME Boiler & Pressure Vessel Codes. They may be furnished in either solution annealed (Grade …

Concentrated solar power (CSP) is a typical renewable energy source which grows fast in areas with high solar irradiance such as Spain, India, South Africa, China, Chile, Australia, Middle East, Morocco, and the United States. The CSP plant generally consists …

Inconel alloy 625 flanges manufactured to ASME B16.5 fall into the Group 3.8 materials of the standard specification. They can be supplied in 7 classes: 150, 300, 400, 600, 900, 1500, 2500. Flanges with hub, such as weld neck, slip …