News

Hastelloy C276 (ASTM B575 UNS N10276) strips after preliminary rolling with dimensions 5 mm(thickness) x 175 mm(width). They are the raw material for production of 0.2 mm – thick strips. Hastelloy C-276 is a typical low-carbon nickel-chromium-molybdenum alloy widely used …

The ethylbenzene dehydrogenation system is the core facility in production of styrene. Metals-Piping has supplied large diameter bellows expansion joints and welded pipes made of Inoloy 800H (UNS N08810) to one of SINOPEC’s styrene project. Specification of the piping system: …

Metals-Piping has supplied a reformer burner for an methanol plant in Egypt. The burner is made of high-temperature nickel alloy Incoloy 800H (UNS N08810).

Incoloy 800H, with UNS designation N08810, is normally employed in service temperatures above 1100°F[593°C] where resistance to creep and rupture is required. Seamless tubes manufactured to ASTM B407 Gr. N08810 can be used as gas collecting pipes of the reformer for …

The distillation column reboiler is widely utilized for the production of dry aluminum fluoride(AlF3). The hydrogen fluoride(HF) is passed through the distillation column and get rectified. Then it is re-vaporized in the reboiler for further processing. Due to the corrosive and …

Metals-Piping has supplied Inconel 625 corrugated bellows for the manufacture of a bellows expansion joint. This bellows expansion joint will be used for a catalytic cracking unit in an Indonesian oil refinery. It is designed to absorb and compensate the displacement …

Recently Metals-Piping has procured two pieces of Incoloy 825 bars for further processing. The bars are manufactured to ASTM B425 Gr. UNS N08825, hot rolled, annealed and roughly ground. PMI test was conducted to verify its chemical composition. The specification …

In a SINOPEC’s methanol plant, the Inconel 600 burner of the Texaco gasifier needs to be replaced. The gasification burner works in extremely harsh conditions: high pressure, high temperature, severe corrosion & erosion by the coal-water slurry and oxidant. After …

The aluminum chloride(AlCl3) generator is the core equipment for the production of titanium dioxide(titanium pigment) in chlorination process. Due to its exceptional resistance to chloride ion environments and stress-corrosion cracking at high temperature, Inconel 600 is routinely chosen for the …

Metals-Piping recently supplied 8 pieces of heavy-wall Inconel 600 elbows to a subcontractor from Brazil. These elbows will be used for the pipeline connecting the reactor and heat exchanger in a fertilizer plant(Vale Fertilizantes, Minas Gerais, Brazil). Specifications: 2″ 90° seamless elbows, …

Metals-Piping just finished the production of a batch of Inconel 600 welding neck flanges for a fertilizer plant in Bintulu, Malaysia. The Texaco Coal Gasification Process (TCGP) is applied at this plant in which coal-water slurry is utilized to produce …

Recently, Metals-Piping has been supplying a set of Alloy 20 piping materials to an oil-refinery project in Czech. This project involves piping construction of the alkylation process facilities. Due to its exceptional corrosion resistance to sulfuric acid, Alloy 20 (UNS …