The titanium & titanium alloy bars and billets are generally supplied in annealed condition in accordance with ASTM B348 or ASME SB-348. The standard specification covers grades 1, 2, 2H, 3, 4, 5, 6, 7, 7H, 9, 11, 12, 13, 14, 15, 16, 16H, 17, 18, 19, 20, 21, 23, 24, 25, 26, 26H, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, and 38. The alloy shall conform to “Table 1 Chemical Requirements” and “Table 2 Tensile Requirements” of ASTM B348.

Definition of Titanium & Titanium Alloy Bar & Billet

• Titanium & Titanium Alloy Bar: a hot rolled, forged, extruded or cold worked semifinished solid section product whose cross sectional area is equal to or less than 16 inch² (10323 mm²); rectangular bar must be less than or equal to 10″ (254 mm) in width and greater than 0.1875″ (4.8 mm) in thickness. Extruded bar has been approved for use on unalloyed titanium grades 1, 2, 3 and 4 only. Other grades may be produced via the extrusion process upon purchasers’ request.
• Titanium & Titanium Alloy Billet: a solid semi-finished section hot worked or forged from an ingot, with a cross sectional area greater than 16 inch² (10323 mm²) whose width is less than five times its thickness.

Have any question, Please enter the form below and click the submit button.

0 + 5 = ? Please enter the answer to the sum & Click Submit to verify your registration.