The titanium & titanium alloy strips, sheets, or plates are generally manufactured to ASTM B265 or ASME SB-265. It shall be furnished in annealed condition covering Grades 1, 2, 2H, 3, 4, 5, 6, 7, 7H, 9, 11, 12, 13, 14, 15, 16, 16H, 17, 18, 19, 20, 21, 23, 24, 25, 26, 26H, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38. The chemical composition and mechanical properties shall be in conformance with “Table 1 Tensile Requirements” and “Table 2 Chemical Requirements” of ASTM B265.

Definition of Titanium & Titanium Alloy Strip, Sheet, and Plate

• Titanium & Titanium Alloy Strip: thickness ≤ 0.187″ [4.75 mm], width < 24″ [610 mm].
• Titanium & Titanium Alloy Sheet: thickness ≤ 0.187″ [4.75 mm], width ≥ 24″ [610 mm].
• Titanium & Titanium Alloy Plate: thickness > 0.187″ [4.75 mm], wide > 10″ [254 mm].

Surface Finish of Ti & Ti Alloy Strip, Sheet, and Plate

Titanium and titanium alloy sheet, strip, and plate shall be free of injurious external and internal imperfections of a nature that will interfere with the purpose for which it is intended. Annealed material may be furnished as descaled, as sandblasted, or as ground, or both sandblasted and ground. If shipped as descaled, sandblasted, or ground, the manufacturer shall be permitted to remove minor surface imperfections by spot grinding if such grinding does not reduce the thickness of the material below the minimum permitted by the tolerance for the thickness ordered.

Have any question, Please enter the form below and click the submit button.

5 + 7 = ? Please enter the answer to the sum & Click Submit to verify your registration.